Component Specification

The internal screen roller type GGT-43 consists of the following components:

• Aluminum tube Ø 43 mm with a groove for fastening the screen material;
• Aluminum weight tube Ø 12 mm with a steel weight Ø 8 mm placed at the bottom of the roller;
• PVC drive mechanism for manual control with a built-in clutch;
• PVC end cap with nickel-plated metal shaft Ø 6 mm;
• Metal mounting bracket (left and right) with PVC stopper;
• PVC chain Ø 4.5 mm;
• PVC chain regulator coupling;
• PVC flat bead for fastening the screen material to the aluminum tube;
• Aluminum screws 4x12 mm for mounting the brackets;
• Screen material (fabric).

Technical Characteristics

The GGT-43 roller has the following technical characteristics:

• Uncovered side of the vertical edge next to the chain is 26 mm ± 6 mm;
• Uncovered side opposite the drive mechanism is 20 mm ± 6 mm;
• Metal chain length depends on screen height;
• The drive mechanism is on the left or right side;
• Final upper position of the lower edge is 20-30 mm below the aluminum tube;
• Optional guide rails or aluminum guides can be installed;
• An optional visible aluminum weight can be added to the bottom edge;
• An optional motor with a remote control can be added.